CHANCE® Wire Holding Stick, 1-1/4" Dia., 6.5' and 8.5'

CHANCE® Wire Holding Stick, 1-1/4" Dia., 6.5' and 8.5'

WIRE HOLDING STICK - 1.25 IN X 6FT 5IN, The Chance Epoxiglas® Wire-Holding Stick is used on or around energized lines for forming, bending and positioning jumper wires- and for holding conductors during splicing operations. The gripper, equipped with an eye so that other sticks can assist with heavy bending, will handle No. 6 solid copper through 1590 kcmil ACSR. Operation of the Wire-Holding Stick has been simplified so that it grips much like locking-type pliers. By tightening the knurled nut at the control lever, the wireholding jaws can be positioned to firmly grip the conductor. When this is done, the tightening control lever must be relaxed in a position about 1 inch away from the pole. Then, to secure the grip on the conductor, push lever down to pole- and to release the conductor simply move the control lever all the way up along the rod. The head of the tool locks in three stop positions so that the lineman can engage and position conductors easily from most angles. The knurled screw handle below the jaw opening is used to adjust the head position from straight to right or left.

Part Number(s):C4033068, C4033069

Price:
855-388-8018

Specifications

Brand:
CHANCE
Tool Type:
CLAMP STICK & HOLDING TOOL
DISCLAIMER: Price is an estimation and does not include any freight/delivery charges, sales tax, titling fees, or registration fees (if applicable). All pricing shown is in USD. Price is subject to change. Submitting a request is simply a request and does not reserve nor guarantee the tool or part. Not all shown inventory is in stock or available. Images displayed may not be the exact tool or representative of the actual tool (material, color, etc.). All specifications, pricing, and availability must be confirmed in writing (directly) with the seller to be binding. We are not responsible for any inaccuracies, errors, or omissions contained herein, and by using this application or site, you, the customer, acknowledge the foregoing and accept such terms. All descriptions and images of tools are copyrighted material of Custom Truck One Source - unauthorized use or duplication is prohibited.